FB092 bronze bushing is based on bronze of CuSn8.0P0.3 and evenly distributed drilling oil holes on the body. When in assembly, oil or grease should be stored in the holes before bushing is sealed from both ends. FB092 has the advantages of abundant oil storage, easy-to-assembly, machine compactness etc. It can replace the conventional whole copper sleeves, thus to save much cost. It is mostly applied under middle load, low speed such as in convey machine, hoisting machine, windlass, aligning machine etc.

Wrapped-Bronze-Bushing-FB090-FB091-FB092-FB093.pdf

Descriptions

1. Material	Chemical Composition (%)		Type
CuSn8P	Cu = 91.3%  Sn = 8.5%  P =0.2%		Lead Free
CuPb10Sn10	Cu = Balance. Sn = 9~11%, Pb=9~11%		With Lead
2. With holes
3. Lead-free & Low-maintenance

Possible Applications

Industrial: Widely used in construction machinery, agricultural machinery and so on.

Advantages

1. Lead-free and fully recyclable. Less expensive than machined bushing. 2. Minimal space required. 3. Lighter in weight than machined bushing or roller bearing. 4. High stability under load, therefore particularly suitable for oscillating bearing. 5. Lubrication grooves are coined into the metal, and any shape desired is possible. 6. Grease depots for long-term lubrication.

Flanged bushing offer the following additional advantages:

1. A single bushing and take both radial and axial forces. 2. A single bearing element is needed to replace both thrust washer and cylindrical bushing. 3. High stability. 4. No fixing of thrust washers.

Physical and Mechanical Properties

Maximum Operating Temperature Tmax		280		°C
Minimum Operating Temperature Tmin		-200		°C
Maximum Static Load Psta,max		140		N/mm2
Maximum Dynamic Load Pdyn,max		140		N/mm2
Maximum Dry Sliding Speed V		2.5		m/s

Available Forms

Cylindrical Bush Flanged Bush Thrust Washer Plate